On this page
- Check first
- How do I map a site from public information before the walk?
- How do I survey the perimeter and entrances from public space?
- How do I identify badge readers and their make from outside?
- How do I record camera coverage, delivery and smoking areas?
- How do I note hours, dress and badge style without photographing people?
- The defender sees
- Done when
- Not covered
- Tools
- Related research
- Reviewed
- Situation
- A signed authorization letter names the sites, the dates and the testers, with a contact who answers at any hour, and local law on photography from public space has been checked. The tester stays on public land or in areas open to the public, attempts no entry, and carries the letter.
- Goal
- A site survey per address: a marked map of perimeter, entrances, readers, cameras and informal doors, with hours and badge style, and the recommended fix for each gap.
- Outputs
- Representative examples on placeholder hosts, trimmed to the lines that matter. Not captured from a public fixture yet.
Check first
- The authorization letter naming each address, the dates and the testers, with the contact's number in every tester's phone.
- Who owns the building. A shared lobby or a landlord's perimeter needs the landlord's permission before the walk.
- Local law on photographing buildings from public space, and any posted restriction at the site.
- Which addresses are in scope and which neighbours are not, marked on a map before anyone travels.
- The client's rules for the walk: hours, number of testers, and whether the guard force knows a survey is possible this month.
Steps
How do I map a site from public information before the walk?
Most of a site survey is done at a desk. Satellite and street imagery give the perimeter, the entrances and the dock. Planning and permit filings often hold floor plans and tenant lists. The client's careers pages, press photos and office videos show badge style and lobby layout. Wireless network names recorded near the address show which organization occupies which floor.
Sources: satellite and street imagery, planning and permit records, the client's own
site photos and recruiting posts, business registry entries for the address,
wireless network names recorded nearby (WiGLE, read only)
Record: per address, perimeter, entrances, dock, parking, neighbours, what the client
has published about the inside
Expected output
Site 1, 100 Example Road
perimeter: fenced on 3 sides, open to the public car park on the west
entrances: main lobby (N), staff door (W), dock (S), smoking door (E, from imagery)
published: floor plan in a 2024 permit filing; badge visible in 2 recruiting photos # <- the inside is already public before we arrive
We record what the sources show about the site and nothing about individuals; photos of staff are noted for badge style and not kept.
Negative result. A public footprint that shows the building and nothing of the inside: no floor plans in filings, no badges in published photos.
Fix. The client reviews what public sources reveal and removes what it can: floor plans in filings, badge close-ups in recruiting material, office tours that show readers and desks. A photo policy for staff covers the rest.
How do I survey the perimeter and entrances from public space?
One pass per side, on foot, in daylight, from the pavement or the public car park. We note every door, gate and barrier: controlled or not, visible from a staffed desk or not, closing on its own or not.
Per entrance: location, type (lobby, staff door, dock, fire exit), control (reader,
key, none, staffed), visible from desk (yes/no), closes itself (yes/no),
propped or held during the pass (yes/no), time observed
Expected output
Entrance Control Desk view Closes Observed
Lobby N reader yes yes 09:10
Staff W reader no slow 09:25
Dock S none no open 09:40 # <- an uncontrolled door with no one watching it
Smoking E reader no propped 09:55
Negative result. Every entrance controlled, every secondary door closing on its own, and the dock closed between deliveries.
Fix. Close secondary entrances outside working hours, fit a closer and a held-open alarm to every controlled door, and staff the dock while it is open.
How do I identify badge readers and their make from outside?
The reader face usually carries the manufacturer's logo, and a photo from public space plus the manufacturer's product page tells us which card technologies that model accepts. A multi-technology reader is sold as reading both 125 kHz proximity cards and 13.56 MHz smart cards; HID's Signo pages, for example, list HID Prox beside Seos, iCLASS and MIFARE DESFire. Whether the installer switched the legacy technology off cannot be seen from outside, so the record says what the reader can accept, not what it does. We also note a keypad, a tamper cover, and wiring visible on the public side.
Per reader: entrance, make and model if visible, keypad (yes/no), mounting height,
wiring visible outside (yes/no), tamper cover (yes/no), photo reference
Expected output
Lobby N HID Signo 40, no keypad, wiring inside, tamper cover
Staff W HID multi-technology, no keypad, cable exits the wall below the reader # <- reader to controller wiring on the public side
Dock S no reader
Negative result. Readers with wiring on the secured side, tamper covers fitted, and a model whose published support list does not include 125 kHz cards.
Fix. Confirm per reader, in the installer's configuration, that the legacy technology is disabled; move wiring to the secured side and use OSDP with Secure Channel to the controller. The reader and badge tests are on the badge cloning page.
How do I record camera coverage, delivery and smoking areas?
Cameras are recorded by position and the direction they face, so the client sees which entrances nobody can review. The dock and the smoking area get their own lines, because those are the doors staff hold open for each other. We point a camera at doors and fixtures, never at a person.
Per camera: position, direction faced, which entrances it covers, lighting at night
Per area: dock hours and whether the door stays open between vehicles; smoking area
location, which door serves it, whether that door is propped
Expected output
Cam 1 NE corner faces lobby N and car park covers: Lobby N
Cam 2 SW corner faces dock S covers: Dock S
Staff W no camera, no light fitting # <- a controlled door nobody can review afterwards
Smoking E served by a reader door, propped with a bin during 2 of 3 passes
Negative result. Every entrance inside at least one camera's field of view, lit at night, with the smoking area inside the controlled perimeter.
Fix. Cover and light every controlled door, move the smoking area inside the controlled line or give its door a closer and a held-open alarm, and keep the dock closed between deliveries under a camera.
How do I note hours, dress and badge style without photographing people?
The last pass is about rhythm: arrivals, desk hours, cleaners and deliveries, and how badges are worn. We record the pattern, not the people: no faces, no names, no following anyone, no photo kept of a badge on a person.
Record: arrival peaks, desk staffed hours, delivery and cleaner times, dress code,
badge colour and lanyard, orientation (photo visible or not), worn outside or
pocketed, whether visitor badges look different
Expected output
Arrivals 08:15 to 09:15 peak, desk staffed from 07:30
Badges blue lanyard, white card, photo facing out; worn outside the building by most # <- badge style readable from the pavement
Visitors plain white sticker, no date visible
Negative result. Badges removed before people leave the building, visitor badges that look different and show a date, and a desk staffed through the whole arrival peak.
Fix. A badge policy that keeps badges inside, visitor badges that expire visibly, and a guard force briefed to look at the photo rather than the lanyard colour.
The defender sees
The desk work leaves no trace at the site; the walk is seen only by people and cameras. A guard force should log an unfamiliar person who circles the building, pauses at readers or photographs doors, and the camera review should find each of our passes at a time that matches our log. The reporting path matters as much as the sighting: a number on the back of every badge, a desk that can reach security and the police, and a route from the guard's log to the security team the same day. We hand the client our timed log to check against their records. A walk that appears on their cameras and in nobody's log, or a sighting that was logged and went nowhere, is a finding in its own right.
Done when
Every address in scope has a marked map, every entrance is recorded with its reader and camera, hours and badge style are noted, and the survey is handed to the client before any entry attempt is planned.
Not covered
Entry attempts, badge cloning, lock work, drones, and anything inside the property line; every observation here is representative of a placeholder site.